software

Anyway, I bought a SH-5 for the bridge in my gothic sg and was taking out the EMG's. Anyway long story short, the guy who did the job rewired the bridge to rhythm (SH-5 is in the bridge, you have to flip it to rhythm to activate it) and rhythm pickups to the treble switch. Anyway if I was too rewire that mistake correctley, what would I need to do? Besides buy a soldering kit?

3-way switch, right?

soso when you put the switch in the 'necl' 'position, the bridge pup is on, and vice versa?

middle position is fine?

easy ... rewire the switch - swap the 2 wires

cheers and good luck
t4d

Doesn't an SG have an LP-style switch? I'm not sure. Can't you just loosen the nut on the switch and rotate it 180 deg's in the body?


Originally Posted by ArtieTooDoesn't an SG have an LP-style switch? I'm not sure. Can't you just loosen the nut on the switch and rotate it 180 deg's in the body?

SG's have the right angle swtich, so re-wiring it is the only option... the other is to set fire to the useless tech...


Originally Posted by pinto79SG's have the right angle swtich, so re-wiring it is the only option...

Ah . . . that could be a problem then.

If you paid for this job, take it back and make him do it right. Eh, forget that... get a soldering iron, learn to do it yourself, and never pay for a pickup install again


Originally Posted by JB_From_HellIf you paid for this job, take it back and make him do it right. Eh, forget that... get a soldering iron, learn to do it yourself, and never pay for a pickup install again

What I am going to do.