software

I want to replace the mid pu of my guitar with a duckbucker or a vintage rail. But I can't find any store that sells the middle model (I live in France). Can I use the neck / bridge model instead ? Can I just adjust the height to get a correct output level ?

The middle versions are often rw/rp so you might have to turn over the magnets.

I forgot to mention that mine is HSH


Originally Posted by i2kI want to replace the mid pu of my guitar with a duckbucker or a vintage rail. But I can't find any store that sells the middle model (I live in France). Can I use the neck / bridge model instead ? Can I just adjust the height to get a correct output level ?

almost all single coils and SC-sized humbuckers are sold as Bridge or quot;Neck/Middlequot;

In the specific case of the Duck or Vintage rails, this is the case, the quot;Neck/Middlequot; version will set you up fine for most, although some prefer the deeper tone and higher output of the quot;Bridgequot; versions, esp. when paired with fullsize humbuckers.... RW/RP is a non issue because both pickups are humbucking


Originally Posted by ZerberusIn the specific case of the Duck or Vintage rails, this is the case, the quot;Neck/Middlequot; version will set you up fine for most, although some prefer the deeper tone and higher output of the quot;Bridgequot; versions, esp. when paired with fullsize humbuckers

Zerb beat me to it. They both should work fine, it's just a matter of personal preference on which one to use.