i'm thinking bout using my guitars original volume and tone pots with my Kramer Pacer custom, original pots for live wires are 100k ohms and the ones fitted on the guitar is 200 kohm how does this change sound on the pickups the reason why i want to do this is because i can't find any 100kohm pots that fits in the holes on the guitar body and i don't wan't to drill these bigger since i want the body to be original.
/ledclone
I had 250k pots with my livewires and they were too bright and clanky. Since I couldn't find 100k pots I used a resistor in series with the pot to bring them down to about 150k.
Snowdog
Ok thanks! if i want to bring down my pots to 100kohm what value on the resistors am i going i need /ledclone64
Around 150k to bring a 250k pot to 100k. The values are approximate not absolute.
Snowdog
could you mail me a drawing exactly how the resisitors should be soldered
to the following mail:jonte64@tele2.se/ledclone64
You run the resistor from the hot lug on the control to the top of the pot.
Snowdog
Ok thanks! i'll try that
/ledclone64
r
留言列表
